Due to the scarcity of rational models for predicting the strength of RC beam-column sandwich joints, a modified simplified softened strut-and-tie model suggests a more rational calculation method for the effective compressive strength and the height of the joint concrete based on the simplified softened strut-and-tie. The shear strength of existing tested 15 sandwich interior joints is calcula...

objectives: mineral trioxide aggregate (mta) is extensively used in endodontics. however, mta is difficult to handle because of its granular consistency, low mechanical properties and initial looseness. the objective of this study was to assess the compressive strength (cs), diametral tensile strength (dts), and ph of set mta using methyl cellulose as liquid. materials and methods: white proroo...

The objective of this study was to investigate the compressive strength parallel to the grain of bamboo scrimber during and after exposure to various temperatures, in a range from 20 to 225 °C. These data were used to provide a basis for the evaluation of the fire performance of bamboo structures. A total of 152 specimens, assembled as group "during-fire" and "post-fire", were tested during and...

This paper presents 186 groups compressive strength tests data of concrete with manufactured sand (MSC) in different curing age and 262 groups compressive strength tests data of MSC at 28 days collected from authors' experiments and other researches in China. Further interpretation and discussion were described in this issues.

the marble slurry wastes (msw) produced by marble industry is left unattended in theenvironment which causes serious environmental problems. in order to evaluate its potential usage in normal1:2:4 concrete, this study was designed, where the partial replacement of cement with msw was examined.replacement of cement with msw from 0 to 100%, and also its usage as an additive material 10% and 20% b...

introduction: the aim of this experimental laboratory study was to evaluate the effect of different mixing and placement techniques on compressive strength (cs) of calcium-enriched mixture (cem) cement. methods and materials: cem powder was mixed with its liquid either by hand mixing or amalgamator mixing. the mixture was loaded to cylindrical acrylic molds with 6.0±0.1 mm height and 4.0±1 mm d...

objectives: maintaining pulp vitality is a main goal in restorative dentistry. introduction of pulp capping agents paved the way to eliminate the shortcomings of these materials and obtain successful restorations. on the other hand, nanotechnology is an emerging field of science with increasing use in dental materials. this study sought to assess the effect of addition of nano-tio2, nano-sio2 a...